2150cc HEMI Fuel Injector Set By: Fuel Injector Set
- Reviews (0)
2150cc (240 lbs/hr at OE 58 PSI fuel pressure) FIC Fuel Injector Clinic Injector Set for Dodge Hemi SRT-8, 5.7 (High-Z)
SRT-8 Fuel Injector Clinic Injector Set: 8 x 2150cc Saturated / High Impedance Injectors. These are the largest high impedance injectors available! Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology. These injectors do not require a resistor pack or P&H drivers. Includes pigtails PGT DEN8 or add Plug & Play adaptors PADPDtoU8. DO NOT USE WITH VP Import, Q16 or OTHER MTBE OXYGENATED FUELS. 2150cc/min @ 43.5 psi, 2485cc/min @ 58 psi.
This massive injector is in a class of its own when low end throttle response and short pulse width control is required. State of the art Data Match Technology dynamic flow matching is used during the production of these injector sets due their large flow rate. This significantly improves the ECUs ability to control these injectors in the sub 2ms pulse width area, typical of idle and part throttle conditions. Each injector is individually serial numbered and the results are provided on the Data Match Sheet providing the most complete flow matching and latency value information available in the industry today.
Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90ºF fuel temperature using CF-16B calibration fluid.
CAUTION! The internal construction of this 2150cc/min injector includes a seal that has been found to swell when in contact with MTBE from oxygenated fuels like Q16 or VP Import. This swelling causes a significant reduction in flow through the injector and therefore renders it unsuitable for use with MTBE oxygenated fuels. Please be sure to follow the care instructions for these injectors since there are potential corrosion issues that may arise from prolonged disuse while exposed to alcohol based fuels (E85, etc).
Fuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.
Every injector is covered against failure caused by defects in original manufacture by our 12 month warranty.
Fuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.
Every injector is covered against failure caused by defects in original manufacture by our lifetime warrant.
This injector set contains high impedance injectors matched to the saturated injector signal generated by this vehicles OEM ECU, OR is suitable for use with an aftermarket ECU made or set up for high impedance injectors.
This set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.
This plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.
A2Speed has every HEMI upgrade you could imagine. Search through a catalog of our favorite performance upgrades for each engine platform.SHOP NOW
Superchargers are the most cost-effective way of adding horsepower to a modern HEMI engine. We carry many different brands and types of superchargers.SHOP NOW
HEMI crate engines are a great addition to any “Resto Mod” project. We can find a way to HEMI swap just about any vehicle!SHOP NOW
- About Us
- What We Do
- How We Do It
- Our Quality
A2Speed’s GEN III HEMI BackgroundMany of us at A2Speed have been working on the Gen III since its inception. As a team we are immersed in the Hemi world. We own, drive, modify, race and occasionally…break them. We use this experience to create SOLUTIONS, not just parts. Automotive engineering has advanced such that it is often difficult to improve on the work done by the OEMs. Difficult, not impossible. Utilizing advanced 3D modeling, CFD and stress simulations coupled with rapid prototyping, allow for the development of specialized parts that would be impractical at OEM volumes. Solutions validated with real world testing. Craftsmen level quality; and because we don’t have the layered overhead, our prices are often at or below the OEM price.
Advanced Aerospace Grade MachiningProduction manufacturing is performed by partner companies that have proven track records for quality and timely deliveries. We look for certifications such as ISO-9001 and AS-9100 along with ITAR and GIDEP registrations. Several of the companies we work with regularly supply major aerospace firms and the DOD. Why use outside machining services? So that you get a better part at a better price. By utilizing only the machine cycles we need, and leveraging the superior skills and years of experience, A2Speed can give you exceptional quality at truly affordable prices.
Our company is guided by a set of core values and beliefs
- We know that we are a community, not a “market”.
- We recognize that we serve this community at the pleasure of its members.
- We understand the passions, challenges and rewards that drive the enthusiast.
- We believe that function drives form, improved performance improves appearance.
- We know that one company can’t do it all, therefore we value partnerships.
How This Applies to Our Customers
- We never settle for anything less than perfection.
- All of our parts are put under intense testing before being released to you
- You can feel secure because we use both our closest partners and our own cars to test A2Speed’s products
- Finally we know that just having a great product isn’t enough, thus we strive to offer superior customer service, and the lowest prices. Giving you the best experience possible from start to finish.
The Ray Barton / A2Speed 6.4L to 7.0L 426 HEMI Crate EngineThe 6.4L, 392 CID to 426 CID HEMI crate engines are completely forged, and...
Edelbrock E-Force HEMI SuperchargersEdelbrock’s E-force HEMI supercharger kits deliver incredible horse power and torque while...
A2Speed 6.4 to 426 Short Block SpecsDisplacement: 426 CID (7.0L)Bore: 4.090Stroke: 4.050Boosted Compression Ratio: 9.8 : 1Naturally...
The Southern HotRod NAG1 HTC Transmission This transmission is recommend for SRT 8 Jeep builds with up to 850HP however this...