800-590-9604 info@a2speed.com
Shop By Vehicle

AEM Digital Wideband UEGO Gauge with Bosch LSU 4.9

Dimensions:6x15x15
Weight:8.0 lbs
Manufacturer:AEM
Price: $263.55
Quantity:
 
  • Description
  • Reviews (0)
  • Related Products (1)

AEM’s legendary Digital Wideband O2 AFR UEGO Gauge is a wideband UEGO air/fuel ratio controller (AFR) and gauge in one. It unites accuracy, speed and control with an easy to read, digital LED display and sAEMeping LED “needle” that changes colors as AFR changes from rich to lean.

NOTE: The 30-4100 Wideband UEGO Gauge Controller that uses the Bosch 4.2 LSU sensor will be superseded to the 30-4110 Wideband UEGO Gauge Controller that uses the Bosch 4.9 LSU sensor in August 2014. Instructions for the 30-4100 will still be available in the Instructions tab after this change.

WHAT IS A WIDEBAND UEGO AIR/FUEL CONTROLLER?
AEM's Wideband UEGO (Universal Exhaust Gas Oxygen, pronounced “You-Way-Go”) Controllers are poAEMrful, cost effective tuning tools that allow users to accurately monitor the Air/Fuel Ratio (AFR) of their engine.

WHY USE A WIDEBAND AIR/FUEL CONTROLLER?
Accurate AFR data is critical when tuning an engine. Running rich (very low air/fuel ratio, excessive fuel) can cause a loss in poAEMr, while running too lean (very high air/fuel ratio, not enough fuel) may result in serious engine damage. Using a wideband air/fuel controller during the tuning process allows you to monitor AFR and adjust tuning parameters to optimize them for maximum poAEMr and efficiency. AEM has a comprehensive line of highly accurate, reliable wideband air/fuel controllers that can help ensure yAEM's vehicle is optimally tuned.

WHAT IS FREE-AIR CALIBRATION?
Some of AEM's competitors require that you frequently perform a free-air calibration procedure to calibrate their O2 sensors. This process involves removing the sensor from the bung while still connected to the controller device, then waving the sensor in the air so it can read atmospheric O2 levels. AEM use Bosch 4.9 LSU sensors in AEM's wideband controllers. AEM's sensors are individually laboratory-calibrated by Bosch and never require free air calibration!

CAN I CHANGE THE AEM UEGO SENSOR’S CONNECTOR?
No. There is a laser-etched, calibrated resistor in the sensor’s connector body. This resistor is specifically created for the exact sensor that it is attached to. Modifying this will invalidate the sensor’s output.

AEM's World-famous Wideband O2 air/fuel ratio UEGO gauge features a digital LED display and sAEMeping LED 'needle' that changes colors as AFR changes from rich to lean. A 52mm (2-1/16") gauge housing ensures that it will fit in most gauge pods and can be remotely mounted virtually anywhere. All AEM digital gauges feature a 0-5v analog output for use with data loggers and almost any engine management system. Each gauge comes with black and silver bezels and black and white faceplates for multiple color combinations and a custom look (a black Lambda faceplate and black and white Air/Fuel Ratio faceplates).

The Bosch UEGO sensor gives the controller its speed and accuracy. The Bosch 4.9 LSU sensor used in the 30-4110 AEM Wideband UEGO AFR Controller Gauge has a faster light off time and draws less current than the 4.2 LSU sensor used with AEM’s 30-4100 Wideband UEGO Controller Gauge, which will be superseded to the 30-4110 gauge in August, 2014. The 4.9 LSU sensor features the same fuel compatibility as the 4.2 LSU and NEVER requires free-air calibration when used with AEM’s 30-4110 Wideband UEGO AFR Gauge. The 30-4110’s 4.9 LSU sensor uses a different connector than the connector used with the 4.2 LSU sensors included with the original 30-4100 gauge controller. The sensors are not interchangeable betAEMen the two gauge controllers in any way, including changing connectors on the gauges.

The Wideband O2 air/fuel ratio UEGO gauge is a must if you want to maximize yAEM's engine's poAEMr and safety. When tuning an engine, accurate air/fuel ratio data is critical because running with too rich of an AFR can cause a loss of poAEMr, and running a lean AFR can result in serious engine damage. AEM's digital Wideband AFR UEGO gauge can quickly alert you to even a .1 change in air/fuel ratio and provide enough time to shut down an engine before damage occurs.

  • Interchangeable black and white faceplates included for customizing gauge appearance (digital gauges only)
  • Bosch 4.9 LSU wideband sensor and AEMld-in bung included (PN 30-4110)
  • No free air sensor calibration required - ever
  • Interchangeable black and silver bezels included
  • Interchangeable black and white faceplates included
  • 52mm (2-1/16”) gauge housing
  • 0-5v analog output (10-20 AFR range only)
 
Product Rating: (0.00)   # of Ratings: 0   (Only registered customers can rate)

There are no comments for this product.
 
AEM Digital Volt Gauge. 8~18Vs
AEM Digital Volt Gauge. 8~18Vs
The AEM Digital Voltmeter Gauge combines unsurpassed accuracy, speed and control with an easy-to-read digital LED interface that... 
$120.61
Read More
 
HEMI Performance Parts

A2Speed has every HEMI upgrade you could imagine. Search through a catalog of our favorite performance upgrades for each engine platform.

SHOP NOW
HEMI Supercharger

Superchargers are the most cost-effective way of adding horsepower to a modern HEMI engine. We carry many different brands and types of superchargers.

SHOP NOW
HEMI Crate Engines

HEMI crate engines are a great addition to any “Resto Mod” project. We can find a way to HEMI swap just about any vehicle!

SHOP NOW

The Home for Ray Barton Racing Engines built GEN III HEMI’s

A2Speed is now providing the HEMI community with the best of the best in regards to engine building companies. Our motors are found in some of the highest horse power GEN III HEMI’s around the country, and are proven to work, and work reliably.

About A2Speed
Quality Products and Services
  • About Us
  • What We Do
  • How We Do It
  • Our Quality
A2Speed is an employee owned automotive performance parts company, specializing in the Gen III HEMI engine and the cars & trucks it powers. Just like you we are Hemi enthusiasts, and like you we are only interested in proven performance solutions. Good enough isn’t. People who invest in performance modifications want parts that last decades, not years. The effort is only valuable if the result is better than good enough, and frankly these days that’s hard to do.

A2Speed’s GEN III HEMI Background

Many of us at A2Speed have been working on the Gen III since its inception. As a team we are immersed in the Hemi world. We own, drive, modify, race and occasionally…break them. We use this experience to create SOLUTIONS, not just parts. Automotive engineering has advanced such that it is often difficult to improve on the work done by the OEMs. Difficult, not impossible. Utilizing advanced 3D modeling, CFD and stress simulations coupled with rapid prototyping, allow for the development of specialized parts that would be impractical at OEM volumes. Solutions validated with real world testing. Craftsmen level quality; and because we don’t have the layered overhead, our prices are often at or below the OEM price.

Advanced Aerospace Grade Machining

Production manufacturing is performed by partner companies that have proven track records for quality and timely deliveries. We look for certifications such as ISO-9001 and AS-9100 along with ITAR and GIDEP registrations. Several of the companies we work with regularly supply major aerospace firms and the DOD. Why use outside machining services? So that you get a better part at a better price. By utilizing only the machine cycles we need, and leveraging the superior skills and years of experience, A2Speed can give you exceptional quality at truly affordable prices.

Our company is guided by a set of core values and beliefs


  • We know that we are a community, not a “market”.
  • We recognize that we serve this community at the pleasure of its members.
  • We understand the passions, challenges and rewards that drive the enthusiast.
  • We believe that function drives form, improved performance improves appearance.
  • We know that one company can’t do it all, therefore we value partnerships.

How This Applies to Our Customers


  • We never settle for anything less than perfection.
  • All of our parts are put under intense testing before being released to you
  • You can feel secure because we use both our closest partners and our own cars to test A2Speed’s products
  • Finally we know that just having a great product isn’t enough, thus we strive to offer superior customer service, and the lowest prices. Giving you the best experience possible from start to finish.
Featured Products
Popular HEMI Performance Parts
Our Featured Partners
American Racing Headers
Airaid
BG
Cometic
Comp Cams
ATI